Fire Extinguishers

CO2 Type Fire Extinguishers

We are the leading company engaged in manufacturing and supplying of CO2 (Carbon Di Oxide) Type Fire Extinguishers.

Features:

IS Specification: IS : 2878 latest revision & capacity 2, 3, 4.5, 6.5, 9 & 22.5 kgs.
Construction: Cypnders bearing IS : 7285 & brass forge valve confirms to IS: 3224
Charge: Co2 confirming to IS : 15222 & filled with purified Co2 gas filpng ratio =0.667
Finish: Painted in synthetic enamel red/fire red epoxy polyester coating.
Accessories Wall mounting brackets & trolley for 6.5, 9 & 22.5kgs.
Approval Approved and certified by BIS

Modular Type Fire Extinguishers

Automatic DCP & Clean agent Gas Fire Extinguisher mainly consist of MIG welded M.S. Body, 2mm CRC Sheet. The upper part of which is fitted with damper or flange for fixing on ceiling or wall. The fixed automatic release nozzle is based on sprinkler technology unlike the sprinkler nozzle it is gas tight. Release temperatures adjusted with sprinkler imported bulb set at 570 C to 1070 C or special temperature settings can be provided according to specific requirements.

An imported pressure gauge is fitted for instant verification of reliability and functionality of every unit. Nozzle is specially designed to give more that 99% discharge. Together with orifice characteristic to cover adequately fire risks with scattering cone of 400 to 450 Angle. This extinguisher is presently available in 4 sizes of 2, 5, 10 and 15 kgs with either wall or ceiling mounted. Extinguishers of higher capacities and with special mountings can also be offered.

Mechanical Foam Type Fire Extinguishers

We are the leading company offering Mechanical Foam Type Fire Extinguishers for our Clients.

Features:-

As per IS Specification & Capacity: AFFF Mechanical Foam IS Spec: 10204: 9 liters. & 50 liters. as per IS: 13386 latest revision.
Approval BIS: with ISI mark
Construction: Body CRCA Sheets, IS : 513 and IS : 1079
Cap: Brass forging
Anti- Corrosive treatment: Body coated with epoxy powder coating / phosphorylated.
Hydraulic test: Carried out at 30 kg/cm2 as per IS norms.
Charge: AFFF/Clean Water & Co2 gas cartridge is fixed with each extinguisher.
Finish: Post Office Red/Fire Red Epoxy polyester powder coated
Accessories: Wall mounting brackets. (Higher capacity is wheel mounted).

Dry Chemical Powder Type Fire Extinguishers

We are offering Dry Chemical Powder Type Fire Extinguishers.

Features:-

As per IS Specification & Capacity: DCP, cap : 5kgs. & 10kgs. as per IS Spec: 2171 & higher cap. 25kgs. 50kgs. & 75kgs. as per IS Spec 10658
Approval: DCP 5kgs. & 10kgs. approved & certified by BIS with ISI mark.
Construction: Body CRCA Sheets, IS : 513
Cap: Brass forging
Anti- Corrosive treatment: Body Coated with epoxy powder coating / phosphatase.
Hydraulic test: Carried out at 30 kg/cm2 as per IS norms.
Charge: Dry Powder Sodium Bi-Carbonate base and Co2 gas cartridge is fixed with each extinguisher.
Finish: Post Office Red/Fire Red Epoxy polyester powder coated
Accessories: Wall mounting brackets. (Higher capacity are wheel mounted)

Clean Agent Type Fire Extinguishers

Features of Clean Agent Type Fire Extinguishers.

BOC NAF PIV based extinguishing agent capable of fighting class A , B & C
High performance extinguishing agent
High quality epoxy paint
Clean agent electrically non conductive, low in toxicity
Clean agent extinguisher manufactured out of CRCA sheet in all welded construction
Controlled discharge
Brass forged head valve with simple squeeze operation
Unique gauge testing systems
Environmental friendly, very low ozone depletion potential Rechargeable & easy to service Capacity : 500 grm, 1 kg, 2 kg, 5 kg.

BOC NAF PIV based extinguishing agent capable of fighting class A , B & C
High performance extinguishing agent
High quality epoxy paint
Clean agent electrically non conductive, low in toxicity
Clean agent extinguisher manufactured out of CRCA sheet in all welded construction
Controlled discharge
Brass forged head valve with simple squeeze operation
Unique gauge testing systems
Environmental friendly, very low ozone depletion potential Rechargeable & easy to service Capacity : 500 grm, 1 kg, 2 kg, 5 kg.

BOC NAF PIV based extinguishing agent capable of fighting class A , B & C
High performance extinguishing agent
High quality epoxy paint
Clean agent electrically non conductive, low in toxicity
Clean agent extinguisher manufactured out of CRCA sheet in all welded construction
Controlled discharge
Brass forged head valve with simple squeeze operation
Unique gauge testing systems
Environmental friendly, very low ozone depletion potential Rechargeable & easy to service Capacity : 500 grm, 1 kg, 2 kg, 5 kg.

DCP Stored Pressure Type Fire Extinguishers

We are offering DCP(ABC) Stored Pressure Type Fire Extinguishers for our valuable Clients.

Features:-

IS Specification: IS. 13849 latest revision.
Approval: ABC Extinguisher approved & certified by BIS and ISI mark.
Capacity: 500gms, 1kg, 2kgs, 5kgs, 10kgs.
Construction: Manufactured out of CRCA sheets in all welded construction
Valve: Brass forged/gun metal.
Hydraulic Testing: 30kgf/cm2
Charge Pressure: 15 kg/cm2
Charge: Dry Powder MONO AMMONIUM PHOSPHATE base.
Finish: Post Office Red/Fire Red Epoxy polyester powder coated
Accessories: Wall mounting brackets.

Water CO2 Type Fire Extinguishers

We are the company engaged in manufacturing and supplying of Water CO2 Type Fire Extinguishers.

Features:-

As per IS Specification & Capacity: Water Co2 cap. 9 ltrs. as per IS Spec: 940 & 50 liters. IS Spec: 13385 latest revision.
Approval BIS: Water Co2, AFFF Mechanical Foam cap. 9 liters. approved & certified by BIS with ISI mark
Construction: Body CRCA Sheets, IS : 513
Cap: Brass forging
Anti- Corrosive treatment: Body coated with epoxy powder coating / phosphorylated.
Hydraulic test: Carried out at 30 kg/cm2 as per IS norms.
Charge: AFFF/Clean Water & Co2 gas cartridge is fixed with each extinguisher.
Finish: Post Office Red/Fire Red Epoxy polyester powder coated
Accessories: Wall mounting brackets. (Higher capacity is wheel mounted)